Commercial, Residential

R32 Refrigerant and F-Gas Regulations Explained Simply

R32 is a refrigerant used in many air conditioners and heat pumps. Its direct climate impact is lower than that of R410A, but it remains a fluorinated greenhouse gas subject to F-gas rules. When choosing a system, efficiency, safety and installation quality also matter.

Introduction

When buying an air conditioner that uses R32, terms such as R32 and F-gas may seem technical. They help explain how the system works, the refrigerant’s climate impact and why qualified professionals are important. At Parkair, we aim to make this information easier to understand.

What is R32 refrigerant?

R32, also known as difluoromethane, is a refrigerant: the fluid that allows a refrigeration circuit to transfer heat. It circulates in a closed circuit and is not consumed during normal operation. In an intact system, periodic recharging is therefore not part of routine maintenance. If refrigerant is missing, the cause should first be identified and resolved.

What does GWP mean?

GWP stands for global warming potential. It measures a gas’s contribution to global warming relative to CO₂ over a defined time horizon. For the same quantity released, R32 has a lower direct climate impact than R410A.

A lower GWP does not mean that an air-conditioning system has no environmental impact. The overall impact also depends on refrigerant quantity, leaks, electricity consumption and end-of-life handling.

Does a lower GWP mean lower energy consumption?

No, not automatically. GWP and electricity consumption are different measures. To compare energy use, check the data and efficiency indicators for the specific model. System sizing, building insulation, controls and installation quality also affect real-world performance.

Is R32 refrigerant safe?

R32 belongs to safety class A2L. It has low toxicity but is flammable, with a low flame-propagation speed. The classification follows the ISO 817 refrigerant classification system, which considers toxicity and flammability. R32 is therefore neither harmless nor non-flammable, and equipment must be designed and installed with the applicable precautions.

What do F-gas regulations require?

F-gas rules aim to reduce emissions of fluorinated greenhouse gases. They cover matters including placing certain equipment on the market, preventing leaks, recovering refrigerants and professional qualifications.

In Great Britain, the relevant framework is based on the Fluorinated Greenhouse Gases Regulations 2015, as amended, together with applicable certification and control requirements. This framework should not be treated as identical to the EU F-gas Regulation.

The UK restrictions must be assessed separately from EU product restrictions. In Great Britain, a restriction introduced from 2025 applies to specified new single-split air-conditioning systems containing less than 3 kg of refrigerant and using refrigerants with a GWP greater than 750, subject to the exceptions in the applicable rules. R32, with a GWP of 675, is below that specific threshold.

The EU dates of 2029 and 2035 for certain split systems must not automatically be applied to Great Britain. Northern Ireland has a separate territorial position, with the EU F-gas regime applying to relevant matters under the arrangements for Northern Ireland.

Who can install an R32 air conditioner?

Certification requirements and the conditions for installing or servicing equipment may vary depending on the type of system, the work being carried out and the country in which it is installed. Before proceeding, check the manufacturer’s guidance and consult the relevant authorities or a qualified professional.

What should someone buying an R32 air conditioner do?

It is important to distinguish legal obligations from good practice. Keeping installation and service records can help track an appliance’s history, but the exact legal requirements depend on the equipment and the applicable rules.

Requirements for refrigerant leak checks and maintenance depend on the characteristics of the equipment and the applicable regulations. To establish which checks are required for a specific system, consult the manufacturer’s documentation and seek advice from a qualified technician or the relevant authority.

In Great Britain, the relevant UK requirements must be checked rather than automatically applying the EU thresholds. Northern Ireland must be assessed separately.

Will an existing R32 air conditioner have to be replaced?

Not automatically. A restriction on placing new equipment on the market does not, by itself, require an existing system to be replaced. Rules for new products must be distinguished from those governing the use, maintenance and recovery of refrigerant in existing equipment.

Which refrigerants is the market moving towards?

The sector is moving towards refrigerants with a lower climate impact, including natural alternatives such as propane R290. The transition differs by equipment type. No single refrigerant suits every application: safety, efficiency, refrigerant quantity and installation conditions all need to be considered.

Which refrigerants does the Parkair range use?

The refrigerant varies by product. R32 is used in MCW 2.0, MCA 2.0, AiROCK Acqua, MCWD, MCWD SLIM and WHP3. AiROCK Aria is available with R32 or R454B. AHP3 uses R290, while HPAW and HPAF use R454B.

The refrigerant and product specifications should be checked against the technical documentation for the specific model.

FAQ

 

Does R32 need to be recharged every year?

No. It is not consumed during normal operation. Any refrigerant loss requires diagnosis and repair.

Is R32 environmentally friendly?

Its direct climate impact is lower than R410A for the same quantity released, but it remains a fluorinated greenhouse gas.

Is R32 flammable?

Yes. It is classed as A2L, meaning low toxicity and low flame-propagation speed.

What is the difference between R32 and R410A?

R32 has a lower direct climate impact for the same quantity released. The two refrigerants are not interchangeable in the same appliance: the equipment must be designed for the refrigerant specified by its manufacturer.

Do I need F-gas certification to install a Parkair air conditioner?

It depends on the product and the work involved. A general exemption for all pre-charged monobloc systems cannot be assumed without checking the equipment configuration and the specific installation activity. Work on the refrigerant circuit must comply with the applicable qualification requirements.

Can I work on the refrigerant circuit myself?

Work on the refrigerant circuit must be carried out by people with the qualifications required for the activity.

Do I have to replace a working system immediately?

No, not simply because restrictions are planned for new products. Market-placement rules must be distinguished from the rules that apply to existing equipment.

RELATED PRODUCTS

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.